Surface Irrigation Pumps

Turf Boss

The Turf Boss excels when used to supply water to a timer operated irrigation system, but the rugged, easily serviced pump can be used in other areas as well. Some of which are residential water transfer, commercial dewatering, rainwater drainage, light agricultural irrigation, sump drainage, and industrial liquid transfer. As a premium self-priming sprinkler pump, the Turf Boss is approved for indoor or outdoor operation through CSA and UL.

Whether it is a sprinkler system, a construction site, or a water transfer tank, when moving high volumes of water the Turf Boss guarantees the right amount of water right on time.

  • D Series

  • The robust D Series centrifugal pumps come standard with heavy-duty cast iron bodies for durability and dynamically balanced impellers for reduced bearing loads and pump longevity. With models ranging from 0.5 to 50 hp, single- and three-phase motor options, as well as TEFC and ODP enclosure options, these pumps are sure to meet the demands of various applications.

  • Heavy-duty cast iron body for increased durability

  • DA1A and DA1B have stainless steel impellers

  • DB1 through DB2/DC2 have bronze impellers

  • DB3 and DC4 have cast iron impellers

  • 1/2-2HP models have 56C frame motors with shaft coupling design for easy removal of pump motor

  • 5 - 50HP models have JM frame motors with shaft sleeve/O-ring design for added protection against shaft damage

  • 3HP models can use either JM frame or 56 frame motors

  • Single- or three-phase motors available on selected models

  • Seal comprised of carbon/ceramic faces, nitrile elastomers and 300-series stainless components

  • Open drip-proof motors standard on all units; TEFC available in JM frame models

Applications:

  • Irrigation

  • Commercial

  • Construction

  • Municipal

  • Light Industrial

  • General Services

The AG series pumps are close-coupled, electric motor driven pumps producing flows ranging from 65 through 2,000 gallon per minute. They feature all-iron construction, enclosed impellers, mechanical shaft seals, replaceable stainless steel shaft sleeves and are all back pull-out design for ease of service. Standard JM shaft motors are available with either an ODP or TEFC enclosure and either single or three phase standard voltages to fit your site requirements.

  • One of a 10 pump family covering the most popular hydraulic performance ranges

  • Designed for increased efficiency and performance

  • Threaded NPT and 125# flanged connection options

  • Family has a flow range from 50 – 2000 gpm

  • NEMA standard JM and JP shaft motors; 1800 and 3600 rpm; ODP and TEFC enclosures available

  • Back pull-out design

  • Standard carbon / ceramic / Nitrile / 316 stainless steel mechanical seals or packing-box option

  • 416 stainless steel shaft sleeves

  • ASTM-A48 CL30 cast iron volute and impellers

Back

©2017 BY GENERATION PUMP CO.